apollo::canbus::gem::Turncmd63类 参考

#include <turn_cmd_63.h>

类 apollo::canbus::gem::Turncmd63 继承关系图:

apollo::canbus::gem::Turncmd63 的协作图:

Public 成员函数
	Turncmd63 ()
uint32_t	GetPeriod () const override
void	UpdateData (uint8_t *data) override
void	Reset () override
Turncmd63 *	set_turn_signal_cmd (Turn_cmd_63::Turn_signal_cmdType turn_signal_cmd)
Public 成员函数 继承自 apollo::drivers::canbus::ProtocolData< ::apollo::canbus::Gem >
	ProtocolData ()=default
	construct protocol data.
virtual	~ProtocolData ()=default
	destruct protocol data.
virtual int32_t	GetLength () const
virtual void	Parse (const uint8_t *bytes, int32_t length, ::apollo::canbus::Gem *sensor_data) const
virtual void	UpdateData_Heartbeat (uint8_t *data)

静态 Public 属性
static const int32_t	ID = 0x63

额外继承的成员函数
静态 Public 成员函数 继承自 apollo::drivers::canbus::ProtocolData< ::apollo::canbus::Gem >
static std::uint8_t	CalculateCheckSum (const uint8_t *input, const uint32_t length)
	static function, used to calculate the checksum of input array.
static T	BoundedValue (T lower, T upper, T val)

详细描述

在文件 turn_cmd_63.h 第 26 行定义.

构造及析构函数说明

Turncmd63()

apollo::canbus::gem::Turncmd63::Turncmd63

(

)

在文件 turn_cmd_63.cc 第 30 行定义.

{ Reset(); }

成员函数说明

GetPeriod()

uint32_t apollo::canbus::gem::Turncmd63::GetPeriod ( ) const

overridevirtual

重载 apollo::drivers::canbus::ProtocolData< ::apollo::canbus::Gem > .

在文件 turn_cmd_63.cc 第 32 行定义.

                                    {
  // TODO(QiL) :modify every protocol's period manually
  static const uint32_t PERIOD = 20 * 1000;
  return PERIOD;
}

Reset()

void apollo::canbus::gem::Turncmd63::Reset ( )

overridevirtual

重载 apollo::drivers::canbus::ProtocolData< ::apollo::canbus::Gem > .

在文件 turn_cmd_63.cc 第 42 行定义.

                      {
  // TODO(QiL) :you should check this manually
  turn_signal_cmd_ = Turn_cmd_63::TURN_SIGNAL_CMD_NONE;
}

set_turn_signal_cmd()

Turncmd63 * apollo::canbus::gem::Turncmd63::set_turn_signal_cmd

(

Turn_cmd_63::Turn_signal_cmdType

turn_signal_cmd

)

在文件 turn_cmd_63.cc 第 47 行定义.

                                                    {
  turn_signal_cmd_ = turn_signal_cmd;
  return this;
}

UpdateData()

void apollo::canbus::gem::Turncmd63::UpdateData ( uint8_t *  data )

overridevirtual

重载 apollo::drivers::canbus::ProtocolData< ::apollo::canbus::Gem > .

在文件 turn_cmd_63.cc 第 38 行定义.

                                        {
  set_p_turn_signal_cmd(data, turn_signal_cmd_);
}

类成员变量说明

ID

const int32_t apollo::canbus::gem::Turncmd63::ID = 0x63

static

在文件 turn_cmd_63.h 第 29 行定义.

---

该类的文档由以下文件生成:

• modules/canbus_vehicle/gem/protocol/turn_cmd_63.h
• modules/canbus_vehicle/gem/protocol/turn_cmd_63.cc